top of page

How can we  help you?

Hose pillar female thread "Brass"

550-01_messing slangpilaar.jpg

550-01
 

  • Material: Brass

  • Thread: BSP

  • Working pressure : 12 Bar

Hose pillar male thread "Brass"

550-02_messing slangpilaar Binnendraad.jpg

550-02
 

  • Material: Brass

  • Thread: BSP

  • Working pressure: 12 Bar

Anker 1
logo1_edited.png

Hose tail BSPT thread

551-01_stalen vaareind.jpg

551-01
 

  • Material: Steel

  • Thread: BSPT

  • Working pressure : 12 Bar.

  • Diameter: 1/2'' up to 6''

Hose tail NPT thread

551-01_stalen vaareind.jpg

551-02
 

  • Material: Staal

  • Thread: NPT

  • Working pressure: 12 Bar.

  • Diameter: 1/2'' up to 8''

Anker 2
logo1_edited.png

Hose coupling male thread

552-01_RVS slangtule.jpg

551-01
 

  • Material: Steel, Stainless steel

  • Thread: BSPT

  • Working pressure : 12 Bar.

  • Diameter: 1/2'' up to 6''

Hose connector

Hose Mender.jpg

551-02
 

  • Material: Steel, Stainless steel

  • Working pressure : 12 Bar.

  • Diameter: 1/2'' up to 8''

Anker 3

Hose coupling with weld end

aanlas slangpilaar.jpg

551-01
 

  • Material: Staal

  • Thread: BSPT

  • Working pressure : 12 Bar.

  • Diameter: 1/2'' up to 6''

Anker 4

Hose pillars

A hose grommet, hose nipple or hose barb is used when connecting a hose from a pipe. These are screwed into the pipe and can be used to clamp the hose securely due to the ribs. Make sure that the diameter of the hose corresponds to the ribs so that the hose is not too loose or does not fit.

This can be secured with hose clamps to get a tight fit. The hose barbs are available in brass, stainless steel or plastic. Angle hose barbs or hose barbs with internal and external threads are also no problem for Flexind B.V.

In addition to our standard stock of hose barbs, we also have hose connectors with which 2 hoses can be attached to each other. We also have steel welded hose connectors available so that the hose can be easily attached to the pipe.  

bottom of page